FDA Elevator Belting
FDA Elevator Belting
FDA white rubber elevator belts are anti-static. The plies are polyester interwoven with nylon layers. The belt is made out of FDA white rubber, according to ISO284.
The covers make it possible that the elevator bolt head will fit and countersunk perfectly. These belts are available in several breaking loads and thicknesses.
FDA white rubber covers are oil and fat resistant and suitable for the food industry.
Belts are cut and punched according to customers specifications.
| Technical specifications | FDA quality |
| Production requirement acc. | DIN 22102 und 22104 |
| Pre stretched plies | Nylon / Polyester |
| Maximum elongation | 1,5% |
| Covers | FDA 70° Shore A |
| Breaking load covers | >= 11 N/mm |
| Abrasion | <= 200 mm3 |
| Density of covers | 1,20 +/- 0,3 g/cm3 |
| Temperature resistance | -25 bis +80 °C |
| FDA Elevator belting | ||||||
| Type of belt | Breaking load | Number of inserts | Covers | Belt thickness | Weight/m2 | Pulley-Ø* |
| 500/4 | 500 kg/cm2 | 4 | 1,5+1,5 mm | 7 mm | 8,4 kg | 400 mm |
| 630/4 | 630 kg/cm2 | 4 | 1,5+1,5 mm | 8 mm | 9,6 kg | 500 mm |
| 800/5 | 800 kg/cm2 | 5 | 2+2 mm | 8 mm | 13,5 kg | 630 mm |
* Recommended minimal pulley diameter (60 – 100% use of breaking load)
Related products
View our calculations for Elevator Parts
Elevator Parts
