K-Atex Flame Retardent
K-Atex Flame Retardant
K-Atex elevator belts are similar to NBR belting but flame retardent according to ISO 340. The plies are polyester interwoven with Nylon layers. The belt is made out of NBR (Nitrile Butadiene Rubber).
Thanks to a special addition in the rubber, this belt is also flame-retardant. The covers make it possible that the elevator bolt head will fit and countersunk perfectly. These belts are available in several breaking loads and thicknesses.
NBR (Nitrile Butadiene Rubber) covers are suitable for transporting products with a higher fat, oil content and a limited acid content. Ideal for the feedmill industry and raw materials intake such as sunflower seeds, fish meal, tapioca and mais. But also for polluted glas cullets.
Belts are cut and punched according to customers specifications.
| Technical specifications | K-Atex flame retardent |
| Production requirement acc. | DIN 22102 and 22104 |
| Anti-static acc. | ISO 284 |
| K-Atex flame retardent acc. | ISO 340 |
| Pre stretched plies | Nylon / Polyester |
| Elongation | Max 1,5% |
| Covers | NBR K-Atex 65 ±5 ° Shore A |
| Breaking load covers | >= 15 N/mm |
| Abrasion | <= 180 mm3 |
| Density of covers | 1,20 +/- 0,3 g/cm3 |
| Temp.resistance | -25 till 100 peak 120 °C |
| K-Atex flame retardent | ||||||
| Type of belt | Breaking load | Nr. of inserts | Covers | Thickness | Kg/m2 | Pulley-Ø* |
| 630/4 | 630 kg/cm2 | 4 | 2 + 2 mm | 9 mm | 10,2 kg | 500 mm |
| 800/5 | 800 kg/cm2 | 5 | 2 + 2 mm | 10 mm | 11,4 kg | 630 mm |
Related products
View our calculations for Elevator Parts
Elevator Parts
