Sprockets for Drop Forged Chain
Sprockets for Drop Forged Chain
Sprockets for drop forged chain consist of a body with symmetrical hub and interchangeable teeth segments. This has the advantage that, when the sprockets wear out, only the wear-resistant teeth segments need to be replaced. Sprockets can be made to your specifications on request. The following versions are available ex stock:
| Sprockets for drop forged chain available ex stock (parameters in mm) |  Body with interchangeable teeth segments | |||||
| Pitch Ø / number of segments per comlete set | ||||||
| Pitch | 6 teeth | 7 teeth | 8 teeth | 9 teeth | 10 teeth | |
| 102 | Ø204,00 / 4 | Ø235,09 / 4 | Ø265,49 / 4 | Ø298,23 / 4 | Ø330,08 / 4 | |
| 125 | Ø250,00 / 4 | Ø288,10 / 4 | Ø326,64 / 4 | Ø365,48 / 4 | Ø404,51 / 4 | |
| 142 | Ø284,00 / 4 | Ø327,28 / 4 | Ø371,06 / 8 | Ø415,18 / 6 | Ø459,52 / 4 | |
| 150 | Ø300,00 / 6 | Ø345,71 / 4 | Ø391,97 / 8 | Ø438,57 / 4 | Ø485,42 / 10 | |
| 160 | Ø320,00 / 4 | Ø368,76 / 4 | Ø418,10 / 8 | Ø467,81 / 4 | Ø517,77 / 4 | |
| 200 | Ø400,00 / 4 | Ø460,95 / 4 | Ø522,62 / 8 | Ø584,76 / 4 | Ø647,21 / 4 |
Pitch-diameter calculator
| z = number of teeth, n = Pitch circle factor | |||||||||
| PitchØ (in mm) = chain distribution x n | |||||||||
| Head Ø sprocket= Pitch Ø + (ridge height fokmember x Factor 0,6) | |||||||||
| z | n | z | n | z | n | z | n | z | n |
| 6 | 2 | 9 | 2.9238 | 12 | 3.8637 | 15 | 4.8097 | 18 | 5.7588 |
| 7 | 2.3048 | 10 | 3.2361 | 13 | 4.1786 | 16 | 5.1258 | 19 | 6.0755 |
| 8 | 2.6131 | 11 | 3.5495 | 14 | 4.494 | 17 | 5.4422 | 20 | 6.3925 |
View our calculations for Conveyor Chains
Conveyor Chains
